HUMBUCKERS for ELECTRIC GUITARS
SIDE by SIDE COIL HUMBUCKERS in
STANDARD SINGLE COILS
COVER
SIDE by SIDE COIL HUMBUCKERS in
BASS GUITAR PICK-UPS JB-style COVER
OTT
True superdistortional model. Three ceramic magnets give enorm output to this pick-ups. Excellent sustain. P-up is built maximum feed-back resistance.
For bridge position.

OTT-1XN
Distortion model very similar to OTT
but slightly less output.

OTT-3XN

Very similar to the OTT but more treble tones. Slightly less power as OTT. Very dynamical. For bridge position.

THE ROCKER

Bright with plenty of top end response,
rich middle and the right amount of
available bass response.
With no distortion at full volume, hard
kicking sound. For bridge position.
Now available with Alnico 8 Magnets
and with white covers, too!

PAF PLUS B

Similar to original PAF but producing
clear bell-like highs and a little more
power. For bridge position.
CERAMIC MAGNETS.

PAF PLUS N

Similar to PLUS B less magnetic field.
Neck position. CERAMIC MAGNETS.

PAF PLUS SPECIAL

For Jazz type sound.
Ceramic magnets.

All humbuckers are screened and supplied
with monting rings; tagged for single coil
selection and SERIES/PARALLEL HUMBUCKING.

Plastic covers are potted with epoxy and instead of lead wires solder tags used for ulimate long life. Pick-ups are built for maximum feedback resistance. Excellent dynamic and sustain are typical of these pick-ups.

...............................................

BASS HB in STANDARD
GUITAR HB COVERS


SSD
Vintage style suitable for finger picking.

SSS
Smooth frequency respone slightly higher output such SSD.

Both bass HB have 62mm magnetic system. Solder tags used. Fully screened and cover potted with epoxy.
Ceramic magnets.


...............................................


P90DE

Available with Alnico 2, 3, 5 and Neodym magnets. Also avaible as humbucker.
VINTAGE
Very similar to the STANDARD.
Recommended for neck position.

STANDARD

Fully screened and hum cancelling, yet
retaining the characteristics of the
original single coil units.
Recommended to midlle position.

SCREAMER

For those who want a more aggresive
hard-kicking sound but no distortion.
Recommended to bridge position.

Plastic covers (black) potted with epoxy,
solder tags used.

Above mentioned p-ups
create a calibrated set for strat-style
guitars and are avaible
on special request
in humbucker covers

...............................................

TRUE SINGLE COILS

SCV
Vintage type sound
.

SCD
Simmilar to SCV but little less trebles.

SCS
Mid frequency orientated p-up recommended to bridge position.
Slightly bigger output
.

All above single coils are avaible with AlNiCo II, AlNiCo III and AlNiCo V bar magnets (on special request also with ceramic bar magnets).
P-ups are internally shielded
for lower hum.

Cover potted with epoxy and solder
tags used. Only in black.

..............................................


DOBRO Pickup

Ultra thin alnico humbucker for Dobro or acoustic guitar. Bar alnico magnets are 58 mm long. Sizes for cover are 30 x 85mm, thickness is 6,4mm only.

ALNICO II JAZZ

JB5
Bass humbucker for 5 string bass
(work very well also with 4 string bass)
in standard Jazz Bass cover.
Magnetic system is 80mm long.

JB6

Bass humbucker for 6 string bass
in standard Jazz Bass cover.
Magnetic system is 92mm long.

All JB p-ups available in sound: Jazz/Funk, Classic, Rocker and custom work on special order.

Plastic cover potted with epoxy, fully screened and feedback resistant.
On special request avaible also
in soapbar style covers.

...............................................

BASS ACTIVE CIRCUITS

KABT

This preamp is custom designed exclusively for bass to improve its tonal quality and decrease output impedance what eliminates treble loss. Significally improves sound of the instrument, increases punch and sustain.
Bass + - 15dB at 40Hz, Treble + - 15dB
at 6kHz. Preamp operates with a single
9V battery and current consumption is
around 0.4 mA.

Dimensions: length 42,5mm, width 11mm,
height 17mm
.

...............................................

MM3

Three band active circuit for bassguitar
with specially taylored bass frequency.
Bass + - 15dB at 80Hz, Middle + - 15dB at 800 Hz and Treble + - 15dB at 8KHz Power supply 9V/0.3 mA

Dimensions: lenght 42.5mm, width 11mm, height 25mm.
MM STYLE BASS HUMBUCKERS
PB STYLE BASS HUMBUCKERS
SOAPBAR BASS HUMBUCKERS
MM5
Bass humbuckers with
79mm ceramic magnets
(works well also with 4-string bass).

MM4
Bass humbucker with 66mm ceramic magnet system. Avaible also with AlNiCo bar magnets.

Plastic cover potted with epoxy, tagged for
single coil selection and "series/parallel
bumbucking". Pickups are built for maximum feedback resistance.
Excellent dynamics and sustain are typical
for all bass pick-ups.



WSS CUSTOM


Custom bass humbucker with  magnetic system up to 125mm.
PB
Powerful humbuckers in standard
PB cover; tagged for series/parallel selection.

Plastic cover potted with epoxy
and fully screened.

Suitable also for 5-string bass.

..........................................


KA4PS





KA5PS


KA6
HB suitable for 6-string bass with 104mm magnetic system (length 130mm, width
40mm, height 20mm)



KA5

HB for 5-string bass with 80 mm magnetic system (length 115mm, width 38mm,
height 16mm)

KA4

HB for 4-string bass with 70mm magnetic system (length 101mm, width 38mm,
height 16mm).


Soapbars are tagged for single coil version and series/parallel humbucker. Avaible with neodym or with ceramic magnets.

Plastic cover fully screened and potted
with epoxy.


Our BRAND NEW BASS pickups.
Vintage voiced split-coil PB pick-up
with medium output level and very good attack.

NEW!!! - Custom Pickups for 7-string Guitars - NEW!!!
Available with ceramic or alnico magnets. Fitted with 4+1 cabel.
WIRING OPTIONS
view from bottom of pick-ups
Remember:
I.
Always use good quality screened
cable wiring pickups.
II.
The back of a pot, switch frame, etc.
are only good earth points as long as they
themselves are electrically connected
to the earth side of the jack.
III.
The string of the instrument
must be earthed.

CAUTION: Do not overheat solder tags.
 
PICK-UPS DESIGNED by KENT ARMSTRONG - Made in KOREA:
LIPSTICK PICK-UPS FOR GUITAR
A set of three for Strats.
 
 
 
Low output AlNiCo single coils for a true vintage sound.
 
LIPSTICK PICK-UPS FOR BASS GUITAR
A set for JB type basses.
 
Ceramic magnets single coils as used
on Lakland Jerry Scheff Signature series.
Low output, vintage sound.
 

Kent has a virtual monopoly on the jazz guitar market and produces p-ups for nearly every builder
of jazz guitars worldwide including: D Angelico, Buscarino, Eastman, Hofner, Larkin, Furch, Mortoro, Timtone, Riccobono
Sadowsky, Mark Lacey, Procházka, DeCara, Manzer, Keller, Andersen, Moll, Comins, Sonntag, Saggitarius, Campellone etc.

KENT ARMSTRONG
HANDMADE ADJUSTABLE PAF
The Gold Standard
KENT ARMSTRONG
HANDMADE ADJUSTABLE SINGLES
Versatile Vintage Tone
KENT ARMSTRONG
HANDMADE "SMOOTH TOP"
Classic Looks, Classical Sound
The state of the art magnetic jazz pickup. The Armstrong Handmade Adjustable PAF is peerlessly quiet, fat and smooth, all handmade with an elegant matte black epoxy body. It is the pickup of choice for many major builders including Andersen, Campellone, Comins, Manzer and many others.

Available in either 6 or 7 string configuration.

Each pickup individually handmade
in the USA by Kent.
This is the world's only floating pickup
that combines the brilliant response of traditional single coil design, with the flexibility of individually adjustable pole pieces for each string. The single coil winding and Alnico magnet replicates the wider frequency response of the classic pickups of the 40's and 50's, but careful shielding and rock-solid epoxy potting makes them much more resistant
to noise and interferences.

In addition, Kent has tapped the coil with three connector lugs, so the player may choose either of two output impedances: 7K or 10K ohms, or even switch between them while playing. Pickup body is slightly arched to match the arc of a radiused fingerboard.

Available in either 6 or 7 string configuration.

Each pickup individually handmade in the USA by Kent.



Kent designed and built the original Benedetto floating pickups, and for those looking for the quality and responsiveness of the originals, Kent produces this pickup under his own name. Pickup body is slightly arched to match the arc of
a radiused fingerboard.

Available in either 6 or 7 string configuration.

Each pickup individually handmade
in the USA by Kent.

Output: approx. 8K ohms.
 
KENT ARMSTRONG
HANDMADE JOHNNY SMITH PICKUPS
The NEW among the Classics!
 
 
 
 
Kent has created a handmade Johnny Smith style pickup that contains
Kent's own premium quality handwound pickup coils and magnets.
Each pickup contains individually adjustable polepieces and a gold plated metal housing sized exactly to match
the originals.

Each pickup individually handmade
in the USA by Kent.
 
 
PICK-UPS FOR DAN ARMSTRONG PLEXIGLASS GUITAR 
 
 
 
Interchangeable single-coil p-ups. Wide variety of sound.

Each pickup individually handmade
in the USA by Kent.
 
 
 
 
Interchangeable humbucker p-ups.
Wide variety of sound.

Each pickup individually handmade
in the USA by Kent.
 
 



[CNW:Counter]
 
Stránky sú optimalizované pre rozlíšenie 1280x1024 bodov a prehliadač Microsoft Internet Explorer verzia 5.0 alebo vyššia.
These pages are optimalized for default 1280x1024 pixels and for browser Microsoft Internet Explorer vs. 5.0 or later.
©
Copyright for web developement D52 • 2007
Ak sa vám páči táto stránka a chceli by ste niečo podobné aj pre seba - kontaktujte: 0905-482314 alebo: creo4zero@gmail.com